Monthly Archives: November 2015

Roofing Tips and Advice For Your Next Roofing Project

If your roof is in need of repair and you insist upon doing the work yourself, it might be in your best interest if you follow a few roofing tips and advice to save yourself time and money.

The first thing you should remember to do when you are tackling a roofing project is to make sure that you apply an ice and water barrier to the roof, especially around chimneys, sky lights, etc. Another important tip to remember is that all materials that you use must be dry, or they could distort the entire roofing project.

If the roofing on your deck needs to be replaced as well, make sure that you only use three quarter inch pieces of plywood for the job. Also make sure that the space you leave between the plywood pieces is at least one eighth of an inch. This will give the wood room to expand.

Drip edges are a very important part of your overall roofing project and the roofing tips and advice for these would be to make sure that drip edges are installed to not only to give a finishing touch but to also help keep your work completely water proof.

It is important that your drip edges are placed on eaves as well and that the material that it is placed on is already been ice and water barrier treated.

Another key thing to remember is that you need to make sure that all the drip edges are securely nailed to the roof.

The homeowner that lives by the ocean would be wise to follow these roofing tips and advice so that all the work they have done remains secure and that is to make sure that all of their shingles are secured by hurricane nailing. What that is, is that you use far more nails on the shingles than you would normally use elsewhere.

It is never wise to do any type of roofing in the winter or early spring. The best times would be late spring or early summer. The latest that you can get away with repairing a roof would be in early fall. The roof needs time to completely seal before winter hits.

Electrical Tips to Consider When Buying a New Home

Electricity is one of the most important aspects to a home. Without proper electricity, a number of amenities would be affected. We would not be able to use lights, appliances, computers, air conditioners, some cable and phone systems, and even our heaters or hot water heaters. When you are considering a new home purchase, it is valuable to check the home electrical systems to ensure your needs are met.

Here are some helpful tips to consider when checking the electrical systems of a new home…

1. Know what to expect. An electrical system includes incoming power lines, the electric meter, the service panel, subpanels, household wiring, electrical boxes, the receptacles or outlets, switches, appliances, lights, and extra equipment used for home entertainment or communication. These should all be included in a new home.

2. Ask for the age of the electrical system. There have been a number of upgrades through the years. It is important to know how old the electrical system is so that you can ensure it is up to code for the house you are buying. Older systems might need to be replaced to handle your electrical needs and this could become quite costly.

3. Check with the Electric Company or previous owners for an estimate on their electric bill. Although you might use more or less electric then the current occupants, you can get a general idea of what to expect.

4. Consider how you will use each room. Make sure there are proper outlets and switches to fit your needs. You do not want to set up your home office and realize you have no phone or internet connection to access. And, if you are building a new construction home, it is a lot cheaper to make these adjustments before the house is complete.

5. Check and existing light switches and outlets to make sure they work properly. A common problem is a switch that does nothing or an electrical outlet that is not functional. These are issues that should be cleared up before buying the house.

6. Make sure the electrical system is sized to handle the electricity amount that you plan to use. An average amp size is 100 or 200 but larger homes could require up to 400 amps. Having the correct size electrical unit will prevent future “blown fuses” when a larger amount of electricity is suddenly needed.

7. Insure that the electrical box is properly labeled. In the event that a circuit needs to be reset, you will want to know which breaker to switch. You do not want to be left cold and in the dark without a clue as to how to reinstate your lights and heat.

8. And, finally, BE SAFE! Electrical systems are required to pass building codes. This increases the safety of you and your family. Circuit breakers prevent fires, Ground fault circuit breakers protect from electrical shocks, and smoke alarms alert occupants of an emergency. These should all be incorporated and working correctly in your new home.

Guaranteeing the electrical system is accurate to your needs and working efficiently is an important and valuable process when purchasing a home. You do not want to be stuck paying high costs for electrical fixes or attempting the “Do it yourself” method. Be sure to use these helpful tips to make certain you are not left in the dark!

Eleven Save Electricity Tips You Can Use at Home

Saving electricity does not mean freezing in winter or having cold showers. You can still live comfortably by just knowing how to save on electricity. I have listed eleven save electricity tips below.

1. Only use you washing machine or dishwasher when they have a full load. You will need enough clothes/dishes to do this of course as you may only run these appliances twice a week.

2. Use cold water for washing your clothes. Unless your laundry contains a lot of grease and oil, a cold wash will get your clothes nice and clean, especially with the new enzyme powered washing powders on the market

3. When replacing an appliance such as a refrigerator, make sure it is as energy efficient as possible. Some countries have star indicators so you can compare different models. Today’s fridges in particular are a lot more energy efficient due to better insulation.

4. Hang your clothes outside on a nice day to save using the dryer. This only takes a little more time and the clothes smell much nicer when you bring them in. This can also extend the life of your clothes.

5. If you have a dishwasher, stop the machine before the drying cycle and let the dishes air dry. There’s no need to use the drying cycle as the hot dishes will dry quite quickly once the steam has been let out of the machine.

6. Use ceiling fans instead of your air conditioner when the weather’s not too hot. Ceiling fans create a nice cool breeze and cost much less to run

7. In dry climates evaporative coolers work well and are much cheaper to run. These types of coolers depend on water evaporation to cool the air and work best in dry climates without too much humidity. They are cheaper to buy as well as run.

8. Clean cooling coils in your air conditioner and refrigerator regularly. This will ensure your appliances run more efficiently.

9. In summer close your blinds or curtains during the day to keep out the glare and heat. A tremendous amount of heat comes through glass doors and windows. The ideal solution is double glazing, but this is expensive. Keeping the curtains and blinds closed will keep a lot of the heat out

10. Close off any rooms you are not using. Especially if you are using the air conditioner, keeping doors closed will allow the space you are using to cool down faster

11. Put draught excluders under doors to prevent air leakage. Prevent cold air leaking into your home in winter and hot air in summer. You can buy insulating strips from the hardware store to better do this.

Five Home Electrical Tips For Do It Yourselfers

Remember that electricity can be dangerous to work with and it wouldn’t be a bad idea to get a couple of books to familiarize yourself with your home electrical system. If you don’t understand the basics of electricity, you’re probably going to have problems making successful electrical repairs to your home.

1. Electricity is one of the few things in your home that can actually kill you. Always remember that your main concern about doing any electrical repairs around your home will be your safety and those around you.

2. I don’t recommend any do-it-yourselfers to work on the main electrical panel box. This is one of the most dangerous spots for anyone who isn’t familiar with the basics of your home’s electrical system.

3. If you’re going to replace an electrical breaker, make sure that the main electrical breaker is off and it wouldn’t be a bad idea, to switch the electrical breaker to the off position that you are planning on removing. This will prevent any electrical arching, just in case there is still electricity flowing through the breaker that you are removing.

4. Your light bulb isn’t working and it needs to be replaced. Make sure that the light switches are in the off position, before replacing any light bulbs. If the light switch is in the on position, and you touch the wrong parts of the light bulb, while removing and replacing it, you could find yourself getting a nice jolt of electricity through your body.

5. If you’re going to replace an electrical outlet or light switch and you don’t know exactly which electrical breaker shuts off that one particular outlet, it wouldn’t be a bad idea to shut the main electrical breaker off. Before you do this, make sure that there isn’t anything on that could become damaged, like a computer or home security system.

If there isn’t any electricity running through the electrical fixtures that you’re repairing, there’s a good chance that you won’t get shocked. Use common sense and always think safety, while working with electricity.

Save Electricity Tips

Are you looking for save electricity tips? It is important that we learn to reduce our consumption of electricity for 2 reasons. Firstly, we need to conserve our environment as we are depleting our natural resources very quickly. Secondly, electric bills are becoming larger as the cost of electricity goes up.

However, I have also found another way of tackling these 2 problems, and that is to build a renewable energy system at home. This point will be further elaborated below.

Top 2 Save Electricity Tips

1. Use Space Heaters Instead of a Central Heating System

Instead of using a central heating system, using space heaters for specific rooms can save a lot of electricity. Many space heaters are made to save electric power and are very safe to use.

2. Check to See if Your Electrical Systems Are Still Energy Efficient

If your home is very old, you should get an electrical contractor to check your electrical wiring system to ensure that it is still working at its best. An inefficient wiring system will result in more expensive power bills unnecessarily, and this could amount to more than thousands of dollars per year.

3. Earth 4 Energy Book Review

This is the manual that I have read and used to build my own homemade electrical system. It is able to do so by harnessing the power of solar and wind energy. Readers will learn exactly how the system works to generate electricity, where to get the parts needed to build the system and how to build it step by step.

The system that I built has helped to reduce my electric bills and at the same time reduce the consumption of fossil fuels and pollution to the environment.

Going Green With Electricity Tips

Have you ever wondered why your electricity bill is so high? Follow these simple tricks to save on your next electricity bill.

Reduce you use of high electricity gadgets.
Here are the simple, most cost efficient and easy steps to reduce your electricity bill. Start off by replacing your light bulbs with compact fluorescent light bulbs (CFLs) or even cutting-edge light emitting diodes (LEDs). There are energy efficient lighting technologies that will dramatically decrease your electricity costs. Also, always turn off the lights if they are not needed on. For example, when you are not in the room; When there is enough sunlight shining in through the window or when you are sleeping. Finally, eliminate electronics that are in sleep mode or standby. Like a TV with a light on or laptops that are merely closed. They suck a lot of electricity even in that status.

Turn your house off
Homes consume a huge amount of energy, especially in heating and cooling. American houses and homes consume over 6 times the amount of houses in other countries. After you’ve researched where all the energy is going in your house or even if you are to lazy to do that, simple steps can help save some money in the field as well. Use natural ventilation as much as possible and stay away from the air conditioning. The best way to have natural airflow would be by opening the windows at night and closing them during the day, or just the ceiling and regular fans and ventilators. Even just blocking the sunlight at the windows on hot sunny days can dramatically decrease the heat.

Buy smart
When you are shopping for electrical gadgets, remember not to be cheap. Cheap appliances may suck up much more electricity on the long run then the appliances that are more expensive. Look at a LED light bulb for example. They are more expensive then a regular light bulb but save you more then 6 times the money. Instead of looking for the cheapest electrical gadgets, you should look for the most energy efficient ones. Most good quality electrical appliances will have a sticker or information on it to give you sufficient information before purchasing.

Homemade electricity
You know how good it feels to be generating your own electricity? Installing in house alternative energy is becoming easier and more cost efficient with all the promotions going on. You can find more and more sun, water and wind electricity generating technologies and companies that can help accommodate you. Look out for these deals!

Charge up your gadgets with new technologies
All your portable gadgets you bring around you have a possible alternative way of charging themselves. Often times you can buy a charger that generates from solar energy of even just a car charger to then feed your gadgets green energy. Some look like notebooks, cell phones, flowers, or are built into backpacks. Almost every mp3 player, laptop, camera or cell phone will have an alternative energy efficient charging device. Some are even attached to backpacks.